Main: Message List - White noise generator

Re: White noise generator

sirblade — Wed, 20 May 2009 11:42:40 GMT

Thank you for the reply. That gives me enough info to start in the right direction.

Re: White noise generator

MBonsoir — Wed, 20 May 2009 05:13:33 GMT

Hello Sirblade:

Currently the RS232 control protocol has no attributes defined for the Generators blocks. You can, however, include a Level Control block after the Generator in your configuration file and control that via RS232 instead. That should give you mute and level control using the FDRMUTE and FRDLVL attributes.

Or you can employ a Router block to define which outputs will be fed with White noise. Additionally, you can create a series of Presets with some pre-defined routings and levels, and just have the Crestron recall them when required.

I hope this helps,

Martin

White noise generator

sirblade — Tue, 19 May 2009 11:17:04 GMT

I am controlling a Nexis CS with a Crestron PRO2 processor using the Crestron modules v7.1.

I would like to know is there a way to control the white noise generator using RS232?

I have a case where the client would like to turn on a white noise so they can talk, but others in the room can hear them using some sort of white noise masking. Example would be we have the 6 outputs setup as 6 speaker zones of a room. They want to be about to white noise 5 zones while they talk in the 6th zone.

Thanks in advance.